Recently, Vital MX set out to improve the 2019 RM-Z450 enough to run with the top 450 shootout bikes. Check out all the mods and equipment this Suzuki received, and what the..
READ MORELatest Posts
Recent Posts
Recently you saw our introduction video telling you about our used 2006 YZ450F that we're rebuilding and documenting step-by-step. In this part 1 video, we'll go over tips on..
READ MOREDecember 14, 2018 / By Kevin Bailey
ProX CEO Brian Reese and crew met the MXA magazine team at Club MX to ride his ProX-equipped KTM 250 SX-F project bike. Check out what went into this build and watch the MXA..
READ MORENovember 30, 2018 / By Kevin Bailey
ProX not only feels it important to offer affordable, high-quality performance parts, but they believe it's important for riders and racers to understand how the many moving..
READ MORENovember 14, 2018 / By Kevin Bailey
Ralf Schmidt of TM Racing US built an MX300 two-stroke for the crew at Motocross Action to test--and they were impressed. Watch the bike in action and see all the factory..
READ MORESeptember 5, 2018 / By Kevin Bailey
Luc Hermsen is a professional jet ski racer out of Europe. Here we take a look at how he got into this form of racing, and we get an in-depth look at his custom Bullett race..
READ MOREAugust 21, 2018 / By Kevin Bailey
In part 1 of our 2006 YZ450F rebuild, we walked you through how to replace the piston with a new ProX piston kit. After the new piston is installed and the cylinder is torqued..
READ MOREJuly 5, 2018 / By Kevin Bailey
Even though it's technically incorrect to call this a Supermini because the displacement remains at 85cc, this Kawasaki KX85 doesn't fall short in the race-ready department...
READ MOREMay 25, 2018 / By Kevin Bailey
Chain drive systems have been transferring power to the rear of motorcycles for nearly a century. Here we take a look at the advantages of both standard MX and O-ring chains,..
READ MOREApril 6, 2018 / By Kevin Bailey
We found a fellow racer on Facebook who had built a very impressive bike, and we had to know more about it. He was nice enough to set aside some time and give us information on..
READ MOREDecember 7, 2017 / By Kevin Bailey
